Home
Dive Compressor
Face Mask
Regulator
Dive Hose
Dive Harnesses
Hull Scrubbers
Shipping Society Links
Click Here To E-Mail Us!

Armada's Diving Harnesses

DANGER!  Safety Notice:  Never attach umbilical (Diving Air Hose) directly to your weight belt.  Always attach it to your safety harness!

Integrated Diving Vest
Designed by U.S.N. Fleet Master Diver, Authorized Navy Use
Part #ASH-109

harnesses-1.jpg (7965 bytes)
  • New reinforced backpack that's thicker.
  • 80 CF. bail out tank is secured by two cam lock devices with velcro.
    A safety strap with stainless D-rings, installed under the tank.
  • 6-5 lb. weight pouches, with brass drain holes.
    Pouches made from heavy ballistic cloth.
  • Each weight pouch has a nexus snap, backed up with velcro enclosure.
  • Adjustable 1 1/2" chest strap.
  • Heavy stainless adjusters are made in-house, for shoulder straps & jock.
    They are not of the scuba variety.
  • Highest quality 2" x 1/8" nylon webbing is made exclusively for Atlantic Diving.
  • Stainless steel, hand set rivets, and backup plates.
  • Stainless D-rings with stainless welded joints.
  • The highest quality materials and workmanship in the commercial industry.

Standard Harness
Part #ASH-100

harness-2.jpg (6873 bytes) This Harness has two front D-Rings and one rear for air hook up.  This provides a means to secure the diving, without strain to the mask or helmet.

Heavy stainless belt adjusters are optional.

Small fits most divers with 32" to 42" chest.  Medium fits most divers with 38" to 46" chest.  Large fits most divers with 42" to 52" chest. Special sizes may be ordered for all harnesses.

Bell Harness
Part #ABH-200

harness-3.jpg (5969 bytes) This harness is set up for Bell diving, with rear upper D-Rings for emergency lifting of divers.

Two front D-Rings provide hook ups for air, or gas hose.  A heavy duty belt adjuster is provided for the optional jock strap.

Small fits most divers with 32" to 42" chest.  Medium fits most divers with 38" to 46" chest.  Large fits most divers with 42" to 52" chest. Special sizes may be ordered for all harnesses.

Back Pack Harness
Part #ABP-400

harness-4.jpg (6648 bytes) This harness is set up Bell or surface supply diving with 2 front D-Rings for hook up, plus an upper D-Ring to facilitate emergency lifting of divers.  A heavy belt adjuster is provided for using a jock strap if desired.

The 1/4" thick back pack is 2 ply nylon, reinforced rubber, punched to accept stainless bands or our 2" Tank cam lock.

Small fits most divers with 32" to 42" chest.  Medium fits most divers with 38" to 46" chest.  Large fits most divers with 42" to 52" chest. Special sizes may be ordered for all harnesses.

Professional Weight Belt
Part # AWB-500

harness-5.jpg (9079 bytes) This belt is produced to give many years of rugged commercial use, with practicability and comfort in mind.  The heavy 1/8" thick by 2" shoulder webbing, with heavy stainless adjusters are standard features at no additional cost.

With all the shell type commercial dry suits, extra heavy Dura -soft webbing is essential for comfort and minimizing chafing.

All metal components with the exception of the weights and bronze buckle are non-magnetic 300 series stainless steel.  The durable rubber belting is reinforced with 2 plys of nylon.  Standard belt dimensions are, 48" long by 4 1/2" wide by 1/4" thick.  The belt is adjustable for waist size:  weight requirements, and shoulder strap length.

Stainless rivets are used on all the shoulder straps instead of stitching , to meet OSHA requirements.

Small fits most divers with 32" to 42" chest.  Medium fits most divers with 38" to 46" chest.  Large fits most divers with 42" to 52" chest. Special sizes may be ordered for all harnesses.

We ship worldwide by air and sea!
Armada Systems, Inc.
P.O. Box 307
Mary Esther, FL 32569 USA
Phone (850) 664-5197 Fax (850) 243-4009
E-mail us at hookahdive@aol.com
Entire Contents © 1999 Armada Systems.   Reproduction in whole or in part without express written permission is prohibited.